Epson EPL-N2000 Reference Manual page 100

Setup Menu
These settings provide the printer with information necessary
for printing. Also see page 5-15.
Interface, Time Out, Standby, Lang, Printer Name,
Toner, Page Count, SelecType Init
Parallel B, Parallel C Menu
These settings control communication between the printer and
the computer when using a parallel interface. Also see page
5-16.
Speed, Bi-D, Buffer Size
Serial Menu*
These settings control the serial interface settings. These
settings are necessary for correct communication between the
printer and the computer. Also see page 5-17.
Word Length, Baud Rate, Parity, Stop Bit, XOn/XOff, DTR,
Buffer Size
*Available only when the LocalTalk/Serial module is installed and it is set to
serial interface. See Chapter 3, " Options," for more information.
L/T*, AUX** Menu
This setting controls the optional interface settings. Also see
page 5-18.
Buffer Size
* Available only when the LocalTalk/Serial module is installed and it is set to
LocalTalk interface. See Chapter 3, " Options," for more information.
**Available only when the Type B interface is installed.
5-6
SelecType