Esc/P 2 Or Fx Mode - Epson EPL-N2000 Reference Manual

ESC/P 2 or FX Mode

This section lists the ESCP2 menu and FX menu options. Unless
specifically mentioned, the same items are available for either
mode.
Font
The Font option selects a font by typeface.
The factory default font is Courier. After selecting the desired
font, you can also adjust the character spacing and size of the
font with the Pitch and Condensed options described below.
Pitch
You can select a character pitch of 10, 12, or 15 characters per
inch (cpi), or choose proportional spacing.
Condensed
Use this option to change the character spacing. Condensed
printing is useful for spreadsheets and other applications that
need to fit a large amount of information on each line.
However, 15-cpi characters cannot be condensed.
T.Margin
Use this option to specify the distance from the top of the sheet
to the baseline of the first printable line. This is measured in
0.05 inch increments.
Text
Use this option to set the page length in lines. The unit of
measure for this option is a 1/6 inch line.
If you change the Orientation, Page Size, or T.Margin settings,
the page length setting automatically returns to the default
setting for each paper size.
5-24
SelecType