Printer Driver; Onetouch Modes; Selectype; Remote Control Panel Utility - Epson EPL-N2000 Reference Manual

Printer Driver

Use the printer driver to easily and conveniently make new printer
settings. Most users may never need to use anything besides their
application software and the printer driver to make printer
settings. You can access the printer driver through an application's
Print command or by choosing your printer in the Printers
folder/program group in your operating system. Be aware that
settings you make in your application software overide printer
driver settings. Use the driver's online help for more information.
To access online help, see your Getting Ready guide.

OneTouch modes

Use the OneTouch modes on the printer control panel to make
printer settings when you cannot make a setting in your
application software. The OneTouch modes are the easiest way to
make several basic settings from the printer's control panel;
however, your software application and printer driver in some
cases override these settings. See "Using the OneTouch Modes" on
page 5-20 for more information.

SelecType

Use the SelecType buttons and display on the printer control panel
to make printer settings when you cannot make a setting in your
application software. SelecType has more detailed options than the
OneTouch modes but it may take a few extra steps to make those
settings. See "Using SelecType," Chapter 5, for more information.

Remote Control Panel utility

Use the Remote Control Panel utility when the printer is not easily
accessible and you want to make SelecType settings. This utility
allows you to make SelecType settings from your computer;
however, it only works in DOS. See "Using the Remote Control
Panel Utility," Chapter 4, for more information.
6
Getting Started