When To Use Selectype - Epson ColorPage EPL-C8000 User Manual

When to use SelecType

In general, use SelecType only for settings you cannot make in
your software, including the following:
Changing the emulation modes and selecting the IES
(Intelligent Emulation Switching) mode
Specifying the channel and configuring the interface
Choosing the size of the memory buffer used to receive data
You should keep the following points in mind when using
SelecType settings:
A number of SelecType settings can also be made using the
OneTouch modes and the printer driver.
Application programs may send commands to the printer that
override SelecType settings. If you are not getting the results
you expect, check your application software settings.
To see the current SelecType settings, print a status sheet.
2-6
Control Panel Function