Epson EPL-N2000 Reference Manual page 89

Text
Use this option to set the page length in lines. The unit of
measure for this option is a 1/6 inch line.
If you change the Orientation, Page Size, or T.Margin settings,
the page length setting automatically returns to the default
setting for each paper size.
AutoCR
Use the automatic carriage return option to perform a
carriage-return line-feed (CR-LF) operation whenever the print
position exceeds the right margin. If Auto CR is Off, the printer
does not print characters beyond the right margin, and it does
not perform a linewrap until it receives a CR. Most software
programs take care of this function.
AutoLF
If you set AutoLF to Off, the printer does not send an
automatic line feed (LF) command with each carriage return
(CR). When you set AutoLF to On, the printer adds a line feed
to each carriage return it receives. If your text lines overprint
each other, set AutoLF to On.
BitImage
With BitImage set to Dark or Light, your printer can correctly
emulate the graphics densities set with the printer commands.
If you select Dark, the bit image density is high. If you select
Light, the bit image density is low.
With BitImage set to BarCode, your printer converts bit
images to bar codes by automatically filling in any vertical
gaps between dots. This produces unbroken vertical lines that
can be read by a bar code reader. BarCode is not available in
I239X mode.
This mode reduces the size of the image being printed and may
cause some distortion when printing bit-image graphics.
Remote Control Panel Utility
4-15