Epson EPL-N2000 Reference Manual page 204

Your printer has the ability to emulate the following printers depending
on the printer emulation mode:
LJ-4
ESC/P 2
FX
GL/2
In addition, the following printer control languages are supported:
PJL
EJL
This appendix lists the printer commands for these modes. Most of the
commands closely emulate the original printer or the control language;
however, some have operational differences because the printers use
different technologies. Additional information is provided in the
descriptions of control commands with these differences.
For more information on emulation modes, refer to the following sections:
Changing the emulation mode
Available symbol sets or character tables
Using the printer as an ESC/P 2 printer
Using the printer as an FX printer
Using the printer as a GL/2 plotter
C-2
Command Summary
Hewlett-Packard LaserJet 4 (PCL5e)
EPSON LQ-570 (24-pin)
EPSON FX-870/1170, or LX-100 (9-pin)
Hewlett-Packard GL/2 graphics language
Printer Job Language
EPSON Job Control Language
Chapter 5
Appendix B
Chapter 5
Chapter 5
Chapter 5