Before printing in EPSON GL/2 mode
You may need to change printer settings depending on your
output needs. First, check the print settings to make sure they
match the data you are trying to print. Check the following
items; the information may be necessary later.
Paper size:
Driver (plotter selection): HP-GL/2 or HP-GL plotters
Pen configuration:
Plot origin:
Orientation:
If you need to configure the printer settings, first switch the
emulation (see page 5-23) and then change the settings using
the printer driver, the Remote Control Panel utility, or
SelecType.
Note:
Settings or data saved in printer RAM (such as downloaded fonts)
may be erased when you switch emulation.
Printer's paper size setting
Pen number, pen width
Center or Corner
GLlike, landscape only
LJ4GL2, landscape or portrait
5-29
SelecType