Fx Mode; Printer Commands Arranged By Topic; Printer Operation; Data Control - Epson EPL-N2000 Reference Manual

FX mode

Printer commands arranged by topic

The following section lists and describes all FX and LQ commands by
topic.

Printer operation

Initialize printer
Control paper loading/ejecting

Data control

Carriage return

Vertical motion

Form feed
Set page length in lines
Set page length in inches
Set skip over perforation
Cancel skip over perforation
Line feed
Select 1/8-inch line spacing
Select 7/72-inch line spacing
Select 1/6-inch line spacing
Select n/216-inch line spacing
Perform n/216-inch line spacing
Tab vertically
Set vertical tabs
Note:
Your printer will not print characters beyond one page length (set with the ESC
C or ESC C0 commands), while an FX printer might print them.
C-12
Command Summary
ESC @
ESC EM n
CR
FF
ESC C n
ESC C 0 n
ESC N n
ESC O
LF
ESC 0
ESC 1
ESC 2
ESC 3 n
ESC J
VT
ESC B nn