Epson EPL-N2000 Reference Manual page 44

Menu
Item
Value
Enter
(Status Sheet)
Form Feed
Continue
(Reset)
2-6
Understanding Your Printer
Selects the corresponding OneTouch mode
setting listed above this button, or selects
the SelecType menu if in SelecType mode.
Press this button when the printer is on line
to enter SelecType mode.
Selects the corresponding OneTouch mode
setting listed above this button or selects the
function available within the current menu
after entering the SelecType mode.
Selects the corresponding OneTouch mode
option listed above this button, or selects
the parameter available within the current
item, after entering the Item of the
SelecType mode.
Selects the corresponding OneTouch mode
option listed above this button, or accepts
the setting currently shown on the display
as a new setting when in SelecType mode.
Press this button two times when the
printer is on line to print the status sheet.
When the printer is off line and data
remains in the printer's memory (Form
Feed light is on), prints out the data and
clears the buffer.
Enables the printer to resume printing after
certain maintenance-required conditions or
errors have been cleared. If the Continue
light is flashing, read the status or error
message on the display and correct the
problem as described in Chapter 6. If used
in combination with the ALT button, the
printer is reset.