Epson EPL-N2000 Reference Manual page 108

Back Shift
Adjusts the printing position on the back side when printing on
both sides. Use this if the printout on the back side is not where
you expected. This item is available only when the Duplex Unit
is installed.
Size Ignore
Selects whether a paper size error is ignored. Turning this item
on causes the printer to print even if the image size exceeds the
printable area for the specified size of paper. This may cause
smudges because of toner that is not transferred onto the paper
properly. When this item is off, the printer stops printing if a
paper size error occurs.
Auto Cont
Permits the printer to automatically continue printing after a
certain period of time when one of the following errors occurs:
Paper Set, Print Overrun and Mem Overflow. When this option
is off, you must press the Continue button to resume printing.
Page Protect
Allocates additional printer memory for printing data, as
opposed to receiving it. You may need to use Page Protect if
you are printing a highly complex page. If a Print Overrun
error occurs, change the setting to ON and reprint your data.
This reduces the amount of memory reserved for receiving data
so your computer may take longer to send the print job, but it
will allow you to print complex jobs. Page Protect usually
works best if set to Auto. You will need to increase your
printer's memory if memory errors continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer's memory
which causes any downloaded fonts to be erased.
5-14
SelecType