Epson EPL-N2000 Reference Manual page 119

CG Table
Use the character generator table option to select the graphics
character table, or the italics table. The graphics table contains
graphic characters for printing lines, corners, shaded areas,
international characters, Greek characters, and mathematical
symbols. Selecting the italics table defines the upper half of the
character table as italic characters.
Country
Use this option to select one of the fifteen international symbol
sets. See "Symbol Sets" in the Appendix for samples of the
characters in each country's symbol set.
AutoCR
Use the automatic carriage return option to perform a
carriage-return line-feed (CR-LF) operation whenever the print
position exceeds the right margin. If Auto CR is Off, the printer
does not print characters beyond the right margin, and it does
not perform a linewrap until it receives a CR. Most software
programs take care of this function.
AutoLF
When you set AutoLF to Off, the printer does not send an
automatic line feed (LF) command with each carriage return
(CR). When you set AutoLF to On, the printer adds a line feed
to each carriage return it receives. If your text lines overprint
each other, set AutoLF to On.
Bit Image
With Bit Image set to Dark or Light, your printer can correctly
emulate the graphics densities set with the printer commands.
When you select Dark, the bit image density is high. When you
select Light, the bit image density is low.
5-25
SelecType