Printing Cad Drawings In Hp-Gl/2 Or Hp Rtl Mode - Epson SureColor P6570 Series User Manual

Printing CAD Drawings in HP-GL/2 or HP RTL Mode

You can change settings in your product's control panel to print CAD drawings using HP-GL/2
(compatible with the HP Designjet 750C) or HP RTL mode. This printing method is best for maps and
blueprints, or when lines need to be emphasized.
Note: The product emulates HP-GL/2 or HP RTL commands, however, not all HP-GL/2 and HP RTL
features are supported on the product. If you intend to use an untested application, we recommend that
you test its output in advance. For a list of applications that have been pre-tested, visit Epson's support
site.
1. On the LCD screen, select
You see this screen:
2. Make sure the Paper Source setting is set to Roll Paper.
Note: If roll paper is not selected when HP-GL2 or HP RTL print data is sent, an error occurs.
3. Select any other settings as necessary.
4. Select the left arrow to return to the previous screen.
5. Select HP-GL/2 Unique Settings.
> General Settings > Printer Settings > Universal Print Settings.
214