Sony Handycam NEX-VG20 Operating Manual page 42

A/V R
Component A/V Cable COMPONENT
(supplied) VIDEO I N
_'° (Blue)PB/CB
(Red)PR/CR
AUDIO
,,,I_
(White)
(Red)
II
A/V connecting cane with S VmDEO
S VIDEO (sold separately)
v
VIDEO
@
AUDIO
_ (White)
_ (Red)
(Yellow)
A/V connecting caNe
(supplied) VIDEO
(Yellow) ;
II AUDIO
(White)
(Red)
When you connect with component
A/V cable
" If you connect only component video plugs,
audio signals are not output. Connect the white
and red plugs to output audio signals.
" Select the [Component] setting tbr the
component input jack you are using. Touch
(MENU) --_ [Setup] -_
[_ (_- Connection)] -_ [Component] -_ a
desired setting -_ _ to make the setting.
When you connect with HDMI cable
" Use an HDMI cable with the HDMI logo.
" Use an HDMI mini connector on one end
(for the camcorder), and a plug suitable for
connecting your TV on the other end.
" Copyright-protected images are not output
from the HDMI OUT jack of your camcorder.
* Some TVs may not function correctly (e.g., no
sound or image) with this connection.
* Do not connect the camcorder HDMI OUT
jack to an external device HDMI OUT jack, as
malfunction may result.
* When the connected device is compatible
with 5.1ch surround sound, high definition
image quality (HD) movies are output in
5.1ch surround sound automatically. Standard
definition image quality (STD) movies are
converted to 2ch sound.
To set the aspect ratio according to the
connected TV (16:9/4:3)
* Set [TV Type] to [16:9]or [4:3]according to
your TV_
When you connect with A/V
connecting cable with S VIDEO
* When the S VIDEO plug (S VIDEO channel)
is connected, audio signals are not output. To
output audio signals, connect the white and red
plugs to the audio input jack of your T'V_
* This connection produces higher resolution
images compared with the A/V connecting
cable.
When your TV is monaural (When your
TV has only one audio input jack)
* Connect the yellow plug of the A/V COlmecting
cable to the video input jack and connect the
white (left channel) or red (right channel) plug
to the audio input jack of your TV or VCR.
When connecting to your TV via a VCR
* Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE (VIDEO
1, VIDEO 2, etc.).
_ Notes
* When you play back standard definition image
quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, record movies
with 4:3 aspect ratio. Touch _ (MENU) -_
[Image Quality/Size] -_ [ _ Wide Mode] -_
[4:3] -* _.