Table of Contents
Advertisement
Available languages
Available languages
, [ _
SteadyShot] is set to [Standard[ in the default setting. Note that if the attached lens does not have an
image stabilizing feature, SteadyShot will not be usable.
" You can capture photos from recorded movies.
" You can check the recordable time, estimated remaining
capacity, etc., by touching _
(MENU) --+
[Setup] --+ [_;a ( _
Media Settings)] --+ [Media Infbl.
" The LCD screen ofynur camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [Guide Frame] to
[On], and record images using the outer frame displayed on the screen as a guide.
Data code during
recording
The recording date, time and condition are recorded automatically on the memory card. They
are not displayed during recording. Howevm; you can check them as [Data Code] during
playhack. To display them, touch _
(MENU) --+ [Setup] --+ [[] ( _
Playhack Settings)]
--+ [Data Code] --+ a desired setting --+ _.
_t(Movie):
When recording
a movie
O(Photo):
When
recording
a photo
/
PHOTO
button
-]
MODE
button
Flashes ---+ Lights up
When HMmdisappears, the photo is recorded.
Press MODEto turn on the I_ (Photo) lamp.
The LCD screen
display
switches
for photo
recording
mode.
Press PHOTO
lightly
to adjust
the focus,
then
press
it fully.
Advertisement
Chapters
Table of Contents
