Table of Contents
Advertisement
Available languages
Available languages
Notes
on the
battery
pack
• When you remove the battery pack or disconnect
the A(" Adaptor, turn the camcorder off and make sure
that the 11_ (Movie)/l_
(Photo) lamps (p. 33), the access lamp (p. 30) are turned ofi-i
• The CHG (charge) lamp flashes during charging under the fbllowing conditions:
- The battery pack is not attached correctl?_
- The battery pack is damaged.
- The temperature
of the battery pack is low.
Remove the battery pack f)_om your camcorder
and put it in a warm place.
- The temperature
of the battery pack is high.
Remove the battery pack f)_om your camcorder
and put it in a cool place.
• In the default setting, the power turns offautomatically
if you leave your camcorder without any
operation
fbr about 5 minutes, to save battery power ([A. Shut Off]).
Notes
on the AC Adaptor
• Use the nearby wall outlet (wall socket) when using the A(" Adaptor. Disconnect the A(" Adaptor f)_om
the wall outlet (wall socket) immediately
if any malftmction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
• Do not short circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malf_.mction.
Note on the power
cord
(Mains
lead)
The power cord (Mains lead) is designed specifically for use with this camcorder only, and should not be
used with other electrical equipment.
You can charge the battery pack in any countries/regi0ns using the AC Adaptor SUpplied with
y0ur Camc0rder within the AC !00 V : 240 V, 50 Hzi60 Hz range.
,,Do not use an electronic vo!tage transformer.
Advertisement
Chapters
Table of Contents
