Charging The Battery Pack - Sony Handycam DCR-PC9 Operating Instructions Manual

Types of trouble and their solutions
Symptom Cause and/or Corrective Actions
No function works though the. power • Disconnect the AC power adaptor from a wall outlet or
is on. remove the battery, then reconnect it in about i minute.
Turn the power on. If the functions still do not work, press
the RESET button using a sharp-pointed object. (If you
press the RESET button, all the settings including the date
and time return to the default) (p. 186).
While charging the battery pack, the • Charging is completed.
CHARGE lamp does not light up. • The battery pack is not properly installed.
• ") Install it properly (p. 12).
You cannot charge the battery pack. • The POWER switch is not set to OFF (CHARGE).
• ") Set it to OFF (CHARGE).
While chacging the battery pack, the • The battery pack is not properly installed.
CHARGE lamp flashes. "> Install it properly (p. 12).
• Something is wrong with the battery pack.
• ") Please contact vour Sony dealer or local authorized Sony
service facility.
The buttons do not appear on the • The DISPLAY/TOUCH PANEL button is pressed.
touch panel. ") Press the LCD screen lightly.
• "> Press the DISPLAY/TOUCH PANEL button on your
camcorder or the DISPLAY button on the Remote
Commander (p. 36).
The buttons on the LCD screen do "q'Adjust the screen (CALIBRATION) (p. 177).
not work.
The indicators appeae mirror- • The mirror mode is activated.
rew_rsed in the viewfindee or on the This is not a malfunction.
TV screen.
Image data cannot be tcansfereed by • The USB cable was connected before installation of the
the USB connection. USB driver was completed.
• ">Uninstall the incorrect USB driver and re-install the USB
driver (p. 149).
-4
O
(continued on the following page)
165