Sony Handycam DCR-PC9 Operating Instructions Manual page 66

Playing back a tape with digital effects
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In VCR mode,
press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect mode appears.
(3) Select a desired digital effect mode. In the STILL or LUMI. mode, the picture
where you select the mode is stored in memory as a still image.
(4) Press -/+ to adjust the effect. Refer to page 49 for details.
(5) Press _ OK to return to PAGE2.
2,3
DIG
EFFT
To return to FN
Press EXIT.
To cancel the digital effect function
Press _ OFF to return to PAGE2.
Notes
• You cannot process externally input scenes using the digital effect function.
• You cannot record images on a tape on your camcorder when you have processed the
image using the digital effect function. However, you can record images on a
"Memory Stick" (p. 126, 131), or on a VCR using your camcorder as a player.
Pictures processed by the digital effect function
• Pictures processed by the digital effect function are not output through the _ DV jack.
• You cannot use the PB ZOOM function for pictures processed by the digital effect
function.
When you set the POWER switch to OFF (CHARGE) or stop playing back
The digital effect function is automaticallv canceled.
66