Sony Handycam DCR-PC9 Operating Instructions Manual page 40

Viewing the recording on TV
Connect your canrcorder to your TV with the A/V connecting cable supplied with your
camcorder to watch the playback picture on the TV screen. You can operate the
playback control buttons in the same way as when you nronitor playback pictures on
the LCD screen. When monitoring the playback picture on the TV screen, we
recommend that you power your canrcorder from a wall outlet using the AC adaptor
(p. 16). Refer to the operating instructions of your TV.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/VCR selector on the TV to VCR.
A/V
Yellow
: Signal flow
IN
@ S VIDEO
@ VIDEO
}AOD,O
Connect your canrcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
4O
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. If you connect the
white plug, the sound is L (left) signal. If you connect the red plug, the sound is R
(right) signal.
If your TV has an S video jack
Connect using an S video cable (optional) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable.
Connect the S video cable (optional) to the S video jacks on both your camcorder and
the TV or the VCR.
This connection produces higher quality DV format pictures.
To display the screen indicators on TV
Set DISPLAY to V-OUT/LCD in the menu settings (p. 105).
Then press DISPLAY/TOUCH PANEL on your canrcorder. To turn off the screen
indicators, press DISPLAY/TOUCH PANEL on your camcorder again.