Sony Handycam DCR-PC9 Operating Instructions Manual page 36

Playing back a tape
36
Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear on the screen.
To make the indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) In the playback mode, press FN and select PAGE3.
(2) Press DATA CODE.
DATACODE _1
(3) Select CAM DATA or DATE DATA, then press _ OK.
(4) Press EXIT.
Using the Remote Commander
Press DATA CODE button on the Remote Conunander in the playback mode.
The display changes as follows:
date/time --+ various settings (SteadyShot OFF, exposure, white balance, gain, shutter
speed, aperture value) --+ no indicator
Not to display various settings, set DATA CODE to DATE in the menu settings (p. 105).
The display changes as follows when you press the DATA CODE button on the Remote
Commander: date/time *--+ no indicator
Date/time
,140mio
s_
0002301
12 05 56AM
JUL 4 2001
[a] SteadyShot OFF indicator
[b] Exposure
mode indicator
[c] White balance indicator
[d] Gain indicator
[el Shutter speed indicator
[f] Aperture value indicator
Various settings
[f]