Sony Handycam DCR-PC9 Operating Instructions Manual page 77

Dubbing only desired scenes
- Digital program editing
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Unwanted scene Unwanted scene
l= _l i_
2
Switch the order
Before operating the Digital program editing
Step 1 Com_ecting the VCR (p. 77).
Step 2 Setting the VCR for operatk_n (p 78, 82).
Step 3 Adjusting the synchronicity of the VCR (p. 83).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing function
Operation 1 Making the program (p. 85).
Operation _' Performing a Digital program editing (dubbing a tape) (p. 87).
Notes
• You cannot dub the titles, display indicators, or the contents of cassette memory.
• When you connect with an i.LINK cable (DV connecting cable), you may not be able to
operate the dubbing function correctly, depending on the VCR.
Set CONTROL to IR in the menu settings of your camcorder.
• When editing digital video, the operation signals cannot be sent with LANC 4,_.
You can connect either the A/V connecting cable or the i.LINK cable (DV connecting
cable).
When you use the A/V connecting cable, connect the devices as illustrated in page 75.
When you use the i.LINK cable (DV connecting cable), connect the devices as illustrated
in page 76.
If you connect using an i.LINK cable (DV connecting cable)
With digital-to-digital c_nnectk n, x idc,o and audio signals are transmittcM in digital
form for high-quality editing.
77