Step 4 Using The Touch Panel - Sony Handycam DCR-PC9 Operating Instructions Manual

Step 4 Using the touch panel
Notes
• When using the touch panel, press operation buttons with your thumb supporting the
LCD screen fronr the back side of it or press those buttons lightly with your index
finger. Do not press thenr with sharp-pointed objects such as pens.
• Do not press the LCD screen too hard.
• Do not touch the LCD screen with wet hands, ft.
• If FN is not on the LCD screen, touch the LCD screen lightly to nrake it appear. You ,._
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
• When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 177). _-
• When the LCD screen gets dirty, use the supplied cleanig cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to grey.
Touch panel
You can operate with the touch panel using the viewfinder (p. 63).
Press FN to display the following buttons:
In CAMERA mode
PAGE1 MENU, SPOT METER, FADER, DIG EFFT, END SCH, EXPOSURE
PAGE2 TITLE, LCD BRT, VOL, MEM MIX
PAGE3 SELFTIMER
In VCR mode
PAGE1 MENU, LCD BRT, VOL, END SCH
PAGE2 TITLE, DIG EFFT, PB ZOOM
PAGE3 DATA CODE, V SPD PLAY, A DUB CTRL, REC CTRL
See p. 115 for MEMORY mode.
21