Sony Handycam DCR-PC9 Operating Instructions Manual page 188

Identifying the parts and controls
The buttons that have the same name on the Remote Conunander as on your camcorder
function identically to the buttons on your camcorder.
RMT-814
[]
[]
[]
[]
[]
[]
PHOTO button
(p. 41, 122)
[] DISPLAY button (p. 36)
[] SEARCH MODE button (p. 69 to 74)
[] _/1_1 buttons (p. 69 to 74)
[] Video control buttons (p. 38)
[] Transmitter
Point toward the remote sensor to
control your camcorder after turning on
your camcorder.
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and - polarities on the batteries to the
+ - marks inside the battery compartment.
[] ZERO SETMEMORY button (p. 68)
[]
START/STOP button (p. 22)
[] DATA CODE button (p. 36)
[] Power zoom button (p. 27)
188
Notes on the Remote Commander
• Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Conmrander may not function properly.
• Your camcorder works in the commander mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your canrcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the Commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.