Audio Dubbing - Sony Handycam DCR-PC9 Operating Instructions Manual

Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If vou connect the audio equipment, you can add
sound to your recorded tape by specifying starting and ending points. The original
sound will not be erased.
Select one of the following connections to add an audio sound.
MIC
(PLUG IN
POWER)
cxdZx
Microphone (optional)
c::dZ:x : Signal flow
You can check the recorded picture and sound by connecting the A/V jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the
headphones or TV.
Audio equipment
I
UNE OUT ]
1 L¢ CR I
AWD OL--t--t
D IO R
Do not connect the
video (yellow) plug.
: Signal flow
A/V
94