Sony Handycam DCR-PC9 Operating Instructions Manual page 150

Viewing images using your computer
For Windows users
(1) Turn on the power of your computer and allow Windows to load.
(2) Connect one end of the USB cable to the USB jack on the camcorder and the
other end to the USB comaector on your computer.
(3) Insert a "Memory Stick" into your camcorder, and connect the AC power
adaptor to your camcorder and then to a wall outlet.
(4) Set the POWER switch to MEMORY.
USB MODE appears on the screen of the camcorder.
(5) Open "My Computer" on Windows and double click the newly recognized
drive. (Example: "Removable Disk (E:)')
The folders inside the "Memory Stick" are displayed.
(6) Select and double-click the desired image file from the folder.
For the detailed folder and file name, see "hnage file storage destinations and
image files" (p. 152).
USB connector
Y USB jack
Computer
USB cable
Push into the end
Desired file type
Still image
Moving picture*
Double-dkk in this order
"Dcim" folder --_ "100msdcf" folder --_ hnage file
"Mssonv" folder--_ "Moml0001" folder --_ hnage file*
* Copying a file to the hard disk of your computer before viewing it is reconunended. If
you play back the file directlv from the "Memory Stick", the image and sound may
break off.
150