Sony Handycam DCR-PC9 Operating Instructions Manual page 97

Audio dubbing
Notes
• New sound cannot be recorded on a tape already recorded in the 16-bit mode (32 kHz,
44.1 kHz or 48 kHz) (p. 110).
• New sound cannot be recorded on a tape already recorded in the LP mode.
• New sound cannot be recorded on blank portions of the tape.
If the i.LINK cable (DV connecting cable) (optional) is connected to your camcorder
You cannot add a sound to a re,corded tape.
We recommend that you add new sound on a tape recorded with your camcorder
If you add new sound on a tape recorded with another camcordc, r (including other
DCR-PC9), the sound quality may become worse.
If you set the write-protect tab of the tape to lock
You cannot record on a tape. Slide, the write-protect tab to release the write protection.
To add new sound more precisely
Press ZERO SET MEMORY at the point where you want to stop recording later in the
playback mode.
Carry out steps 3. Recording automatically stops at the point where ZERO SET
MEMORY was pressed.
97