Sony Handycam DCR-PC9 Operating Instructions Manual page 117

Using a "Memory Stick" - introduction
You can select image quality mode in still image recording. The default setting is FINE.
(1) Set the POWER
switch to MEMORY or VCR. Make sure that the LOCK is set to
the right (tmlock) position.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in _ in the menu settings, then press
EXEC (p. 105).
(4) Select QUALITY with _/T to set a desired image quality, then press EXEC.
2
4
LOCK
3
0
o
To return to FN
Press EXIT.
Image quality settings
Setting Meaning
FINE Use, this mode when you want to record high quality images.
(Indicator: FINE) The image is compressed to about 1/6.
STANDARD This is the standard image quality. The image is compressed
(Indicator:STD) to about 1/10.
117