Memory Function - Sony Handycam DCR-PC9 Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of "0:00:00". Use the Remote Commander for this
operation.
(1) In the playback mode, press DISPLAY on the Remote Commander if the
counter is not on the screen.
(2) Press ZERO SET MEMORY on the Remote Commander at the point you want
to locate later. The tape counter shows "0:00:00" and the ZERO SET MEMORY
indicator flashes.
(3) Press • when you want to stop playback.
(4) Press _ to rewind the tape to the tape counter's zero point. The tape stops
automatically when the tape com_ter reaches approximately zero. The ZERO
SET MEMORY indicator disappears and the time code appears.
(5) Press IDa. Playback starts from the com_ter's zero point.
DISPLAY
4t_I--
ZERO SET MEMORY
Notes
• When you press ZERO SET MEMORY before rewinding the tape,, the zero set memory
function will be canceled.
• There may be a discrepancy of several seconds between the time code and the tape
count_-_r,
• The ZERO SET MEMORY indicator disappear when you press FN.
If a tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.
68