Date Search - Sony Handycam DCR-PC9 Operating Instructions Manual

Searching a recording by date - Date search
Note
If one day's recording is l¢,ss than 2 minutes yollr camcorder may not accurately find
the point where the recording date changes.
If a tape has a blank portion between recorded portions
The date search function may not work corrc, ctly.
Cassette memory
The tape cassette memory can hold 6 recording date data. If you search the date among
seven or more data, see "Searching for the date without using cassette memory".
(1) Set the POWER switch to VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then set CM SEARCH to OFF in [_ in the menu settings (p. 105).
(4) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
[*DATE SEARCH ---* PHOTO SEARCH ---* PHOTO SCAN ---* (no indicator)
(5) Press _ on the Remote Commander to search for the previous date or press
on the Remote Commander to search for the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press _ or I_1, your caincorder searches for the previous or next date.
To stop searching
Press II/[_ on the Remote Commander or on vour camcorder.
>
D-
O
O
71