Scanner Problems - Ricoh Aficio SP C232SF User Manual

Scanner Problems

This section describes scanner problems and possible solutions.
Problem
The machine does not start scan-
ning.
The scanned image is dirty.
The scanned image is distorted
or out of position.
The scanned image is upside
down.
The scanned image is blank.
The scanned image is too dark or
too light.
Solution
The ADF or ADF cover is open. If the ADF or ADF cover is
open, you cannot scan using the ADF. Close the ADF or
ADF cover.
• The exposure glass or ADF is dirty. See p.311 "Clean-
ing".
• Before placing originals on the exposure glass, make sure
that toner or correction fluid is dry.
The original was moved during scanning. Do not move the
original during scanning.
The original was placed upside down. Place the original in
the correct orientation. See p.91 "Placing Originals".
The original was placed with the front and back reversed.
When using the exposure glass, place originals copy side
down. When using the ADF, place originals copy side up.
See p.91 "Placing Originals".
Adjust the image density. See p.150 "Adjusting image den-
sity".
Scanner Problems
287
9