Scanner Problems; When Scanning Is Not Done As Expected - Ricoh SP 220SNw User Manual

10. Troubleshooting

Scanner Problems

When Scanning Is Not Done As Expected

Problem
The scanned image is dirty.
The scanned image is distorted or
out of position.
The scanned image is upside down.
The scanned image is blank.
The scanned image is too dark or
too light.
270
• The exposure glass or ADF is dirty. See page 239
"Maintaining the Machine".
• Before placing originals on the exposure glass, make
sure that toner or correction fluid is dry.
The original was moved during scanning. Do not move the
original during scanning.
The original was placed upside down. Place the original in the
correct orientation. See page 56 "Placing Originals".
The original was placed with the front and back reversed.
When using the exposure glass, place originals copy side
down. When using the ADF, place originals copy side up. See
page 56 "Placing Originals".
Adjust the image density. See page 123 "Specifying Scan
Settings for Scanning".
Solution