Ricoh Aficio SP C232SF User Manual page 305

Message
Life End Transfer Belt
Life End Waste Toner Bottle
Life End X Toner Cartridge
Lower Misfeed Jam
Media Type is illegal
Memory Full 1.TX 2.Cancel
Memory Overflow
Misinstall Toner X
Misinstall Waste Toner Bottle
M toner Independent-supply
Near End X Toner
Near End Waste Toner Bottle
Causes
The transfer belt is no longer
usable, and must be replaced.
The waste toner bottle is full.
The machine has run out of
the indicated toner.
Paper has been jammed in the
machine.
2-sided copy could not be per-
formed because the tray does
not contain the valid type pa-
per, which are thin, plain, re-
cycled, color, preprinted or
prepunched.
Memory has reached capacity
while scanning originals
when trying to send a fax in
Memory Transmission mode.
The data is too large or com-
plex to print.
The print cartridge has not
been installed or has not been
installed correctly.
The waste toner bottle has
been installed incorrectly.
A non-supported print car-
tridge is installed.
The print cartridge is almost
empty.
The waste toner bottle is al-
most full.
Error and Status Messages on the Screen
Solutions
Contact your sales or service
representative.
Replace the waste toner bottle
with a new one. See p.304 "Re-
placing the Waste Toner Bot-
tle".
Replace the indicated print
cartridge. See p.299 "Replac-
ing Print Cartridges".
Remove the jammed paper.
See p.272 "Removing Printing
Jams".
• Specify the tray containing
the valid type paper (other
than the bypass tray) in the
[Paper Select] setting. See
p.200 "Copy Settings" .
• Specify the valid paper
type for the tray selected
for printing copies in the
[Paper Size] setting. See
p.217 "Machine Settings".
Press {1} to send only the pag-
es that have been scanned in
memory, or press {2} to can-
cel.
Select [600X600 1Bit] in [Resolu-
tion] under [PDL Settings] to re-
duce the size of data. See p.236
"PDL Settings".
Reinstall the print cartridge.
See p.299 "Replacing Print
Cartridges".
Reinstall the waste toner bot-
tle. See p.304 "Replacing the
Waste Toner Bottle".
Remove and replace it with a
print cartridge specified by an
authorized dealer.
Prepare a new print cartridge.
Prepare a new waste toner
bottle.
9
295