Adjusting Image Density - Ricoh Aficio SP C232SF User Manual

Using the Scanner Function
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
• When the {Clear/Stop} key is pressed while the initial screen is dis-
played.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Reference
For details about [Document Size], see p.206 "Scanner Settings".
For details about [Auto Clear], see p.231 "Administrator Settings".

Adjusting image density

This section describes how to adjust image density for the current job.
5
There are five image density levels. The higher the density level, the darker the
scanned image.
A
Press the {Density} key.
B
Press the {Density} key or {U}{T} keys to select the desired density level,
and then press the {OK} key.
Note
❒ Press the { } key or {Clear/Stop} key to discard the current change and re-
turn to the initial screen.
❒ You can change the machine's default [Density] setting to always scan with
a specific density level.
❒ Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [Auto Clear]
while the initial screen is displayed.
• When the {Clear/Stop} key is pressed while the initial screen is dis-
played.
• When the machine's mode is changed.
150
BPC022S