Troubleshooting
Troubleshooting
Printing or Scanning Problems
❖ Images are too dark or too light on the copied pages or
scanned files
Image density is too dark or too light. Adjust the image density.
❖ Toner smears on the printed surface
Toner on the printed surface is not dry. Do not touch printed surfaces immediately after
paper is output. Remove freshly output paper one by one, taking care not to touch printed
areas.
❖ Copied pages or scanned files are dirty
Toner or correction fluid on the original is not dry. Before placing originals on the exposure
glass, make sure that toner or correction fluid is dry.
❖ The same area is dirty whenever making copies or scan-
ning files
The exposure glass or ADF is dirty. Clean the exposure glass or ADF. Clean the parts
indicated with arrows with a soft damp cloth and then wipe the same parts with a dry cloth
to remove any remaining moisture. For more details, see "Cleaning", User Guide.
Exposure Glass
ADF
BAA083S
BAA084S
23