Basic Operation In Printer Mode; If A Paper Mismatch Occurs - Ricoh Aficio SP C232SF User Manual

Basic Operation in Printer Mode

The following procedure explains how to perform basic printing.
A
Open the printer properties dialog box in your document's application.
B
Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
C
Click [OK].
Note
❒ If you are using the Type 2 model with tray 2 installed, you can select tray
1 or 2 as the priority tray using the [Tray Priority] setting under [PDL Set-
tings].
❒ The priority tray setting is available for the Type 2 model only.
❒ If a paper jam occurs, printing stops after the current page has been printed
out. After the jammed paper is removed, printing restarts from the
jammed page automatically.
Reference
For details about accessing the printer properties, see p.105 "Accessing the
Printer Properties from an Application".
For details about [Tray Priority], see p.236 "PDL Settings".
For details about how to remove the jammed paper, see p.272 "Removing
Printing Jams".

If a Paper Mismatch Occurs

If the paper size or type does not match the print job's settings, the machine re-
ports an error. There are two ways to resolve this error:
❖ Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched
paper.
❖ Reset the print job
Cancel printing.
Note
❒ If the [Auto Continue] setting under [Machine Settings] is enabled, the ma-
chine ignores the paper type and size settings and prints on whatever pa-
per is loaded. Printing stops temporarily when the error is detected, and
restarts automatically after ten seconds.
Reference
For details about [Auto Continue], see p.217 "Machine Settings".
Basic Operation in Printer Mode
3
107