Ricoh Aficio SP C232SF User Manual page 224

Configuring the Machine Using the Control Panel
• Tray1 Only
• Tray2 Only
❖ Delete Document
Deletes unsent fax jobs remaining in the machine's memory.
This function is only performed when selected.
• Memory Job Clear
To delete a fax job, select the desired job, and then select [Clear]. Selecting
[Not Clear] exits to the previous level of the menu tree without deleting the
fax job.
• All Clear
To delete the fax jobs, select [Clear]. Selecting [Not Clear] exits to the previ-
ous level of the menu tree without deleting the fax job.
❖ Comm Settings
• ECM TX
Sets the machine to automatically resend parts of the data that are lost dur-
ing transmission.
Default: [On]
• Off
• On
• ECM RX
7 Sets the machine to automatically receive parts of the data that are lost dur-
ing reception.
Default: [On]
• Off
• On
• Dial Tone Detect
Sets the machine to detect a dial tone before the machine begins to dial the
destination automatically.
Default: [Detection]
• Detection
• Not Detection
• TX Speed
Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
214