System Setup Menu - BenQ SH940 User Manual

System Setup menu

Function
Language
Splash Screen
Projector Position
Background Color
Menu Settings
Operation
Settings
Input Source
Auto Source
Search
Sets the language for the On-Screen Display (OSD) menus. See
menus" on page 22 for details.
Allows you to select which logo screen will be displayed during projector start-
up. You can choose BenQ logo screen, Blue screen or Black screen.
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See "Choosing a location" on page 12
Allows you to choose the color of the background screen that will be displayed
when there is no input source detected.
Menu Display Time
Sets the length of time the OSD will remain active after your last key press. The
range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the OSD messages about the status of detecting signals.
Direct Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector or remote control when the projector is
I
I
plugged in.
Signal Power On
Sets whether to turn the projector directly on without pressing POWER or
ON when the projector is in standby mode and the signal is feed through the
VGA cable.
Auto Power Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 52
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 3 hours.
Selects an input source to be projected. See
page 21 for details.
Sets whether the projector searches automatically for input sources. If the
source scan is On, the projector will scan for input sources until it acquires a
signal. If the function is not activated, the projector selects the last used input
source.
Description
for details.
for details.
"Selecting an input source" on
Using the projector
"Using the
47