Advanced Setup Menu - BenQ SH940 User Manual

Advanced Setup menu

Function
Lamp Settings
HDMI Settings
Baud Rate
Test Pattern
High Altitude
Mode
Audio Settings
Password
Lan Control
Settings
Reset All Settings
Expert Mode
Lamp Power
Selects the projector lamp power between Normal and Economic modes.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 55
Equivalent Lamp Hour
Shows the lamp hour information. See
page 52 for details.
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
Selects a baud rate that is identical with your computer's so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector's firmware. This function is intended for qualified service
personnel.
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input
signal.
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 39
See "Adjusting the sound" on page 36
Password
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 23
See "Controlling the projector through a Lan environment" on page 37
details.
Returns all settings to the factory preset values.
The following settings will still remain: names of user modes,
Keystone, Language, Projector Position, High Altitude Mode,
Password, and Expert Mode.
The Expert Mode menu is password protected and only accessible by
authorized calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Description
for details.
"Getting to know the lamp hour" on
for details.
for details.
for details.
for details.
Using the projector
for
49