Table of Contents
Advertisement
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature and select User 1, User 2, or User 3 by pressing
projector or remote control.
2. Press
to highlight Color Temperature User_ Fine Tuning and press ENTER. The Color
Temperature User_ Fine Tuning page is displayed.
The menu name "User_" corresponds with the setting selected in Color Temperature.
3. Press
/
to highlight the item you want to change and adjust the values by pressing
•
Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
•
Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU on the projector or MENU/EXIT on the remote
control.
Selecting a Gamma setting
Highlight Gamma Selection and select a preferred setting by pressing
remote control.
Gamma refers to the relationship between input source and picture brightness.
•
Gamma 1/2/3
Select these values according to your preference.
•
Gamma 4
Increases the average brightness of the picture. Best for a lit environment, meeting room or family
room.
•
Gamma 5/6
Best for viewing movies in a darkened environment.
•
Gamma 7/8
Best for viewing movies which are mostly composed of dark scenes.
High Brightness
Low Contrast
1
2
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher
brightness while providing truer, more vibrant colors in picture. When set to "Off", Brilliant Color is
disabled.
Low Brightness
High Contrast
3
4
5
6
7
8
/
on the
/ .
/
on the projector or
Using the projector
31
Advertisement
Table of Contents
