Connecting Component-Video/Rgb Devices; Connecting Video Devices - BenQ SH940 User Manual

Connecting component-video/RGB devices

Connect your RGB source (DVD player or HD set top box) to the RBGHV inputs. You can also use a
BNC- type component cable to connect your video devices. The audio connections are provided for
informational purposes only. You can also connect the separate audio cable to a suitable audio amplifier.
AV equipment: DVD player, digital
tuner, etc.
Speakers

Connecting video devices

You need only connect a composite Video cable from the same device. The audio connections are
provided for informational purposes only. You can also connect the separate audio cable to a suitable
audio amplifier.
AV equipment
Speakers
• If you have already made a Component Video connection between the projector and the video source
device, you need not connect to this device again using a composite Video connection as this makes an
unnecessary second connection of poorer picture quality. You need only connect using a composite
Video connection if Component Video is not supplied on the video source device (for example, with
some analog video cameras).
• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, please check that the video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.
18 Connecting with video equipment
Audio cable
RGBHV cable
Component video cable
Audio cable
Video cable
Audio cable
Audio cable