Table of Contents
Advertisement
Picture -- Basic menu
Function
Picture Mode
Load Settings
From
Brightness
Contrast
Color
Tint
Sharpness
Reset Picture
Settings
Rename User
Mode
Picture -- Advanced menu
Function
Black Level
Clarity Control
Color
Temperature
Color
Temperature
User_ Fine Tuning
Gamma Selection
Brilliant Color
Color
Management
Film Mode
3D Comb Filter
Dynamic Black
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
page 27
for details.
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
the User 1/User 2 mode" on page 28
Adjusts the brightness of the picture. See
details.
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 29
Adjusts the color saturation level -- the amount of each color in a video
picture. See
"Adjusting Color" on page 29
Adjusts the red and green color tones of the picture. See
page 29
for details.
Adjusts the picture to make it look sharper or softer. See
on page 29
for details.
Returns all settings in the Picture -- Basic and Picture -- Advanced menus
to the factory preset values. See
details.
Renames User 1, User 2, or sRGB. See
for details.
Sets the picture grayscale as 0 IRE or 7.5 IRE. See
page 30
for details.
Adjusts the picture clarity. See
details.
There are several color temperature settings available. See
temperature*" on page 30
See
"Setting a preferred color temperature" on page 31
See
"Selecting a Gamma setting" on page 31
See
"Adjusting Brilliant Color" on page 31
See
"Color Management" on page 32
See
"Setting Film Mode" on page 32
See
"Setting 3D Comb Filter" on page 33
Automatically changes the black level of the projected pictures to enhance the
effect of contrast ratio.
Description
"Selecting a preset mode" on
for details.
"Adjusting Brightness" on page 29
for details.
for details.
"Resetting the picture mode" on page 28
"Renaming user modes" on page 28
Description
"Setting Black Level" on
"Controlling image clarity" on page 30
for details.
for details.
for details.
for details.
for details.
for details.
"Setting
for
"Adjusting Tint" on
"Adjusting Sharpness"
for
for
"Selecting a color
for details.
45
Using the projector
Advertisement
Table of Contents
