Table of Contents
Advertisement
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See
page 17
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU on the projector or MENU/EXIT on the remote control to open the OSD menu and
press
/
to highlight the Advanced Setup menu.
2. Press
to highlight Audio Settings and press ENTER. The Audio Settings page is displayed.
3. Highlight Mute and press
Adjusting the sound quality
To adjust the sound level, press VOLUME+
1. Repeat steps 1-2 above.
2. Press
to highlight Volume and press
To adjust the sound treble and bass:
1. Repeat steps 1-2 above.
2. Press
to highlight Treble/Bass and press
To set the SRS:
1. Repeat steps 1-2 above.
2. Press
to highlight SRS and press
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1-2 above.
2. Press
to highlight Power On/Off Ring Tone and press
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the Power On/Off Ring Tone.
36
Using the projector
/
to select On.
VOLUME- on the remote control, or:
/
/
to select a desired sound level.
/
to select a desired value.
/
to turn on/off the function.
"Connecting with video equipment" on
/
to select Off.
Advertisement
Table of Contents
