System Setup: Basic Menu - BenQ W1700 User Manual

Table of Contents

Advertisement

There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image proportionally to fit the
• Real: Projects an image as its original resolution and
Aspect Ratio
• 4:3: Scales an image so that it is displayed in the center
• 16:9: Scales an image so that it is displayed in the
• 2.4:1: Scales an image so that it is displayed in the
12V Trigger
If On is selected, the projector will send electronic signal out when it is turned on.
We recommend you use the High Altitude Mode when your environment is
between 1500 m –3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "High Altitude Mode" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
High Altitude
may display auto shut-down symptoms, which is designed to protect your projector
Mode
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.

SYSTEM SETUP: BASIC menu

Language
Sets the language for the On-Screen Display (OSD) menus.
Background
Sets the background color for the projector.
Color
Splash Screen
Allows you to select which logo screen will be displayed during projector start-up.
Allows the projector to turn off automatically if no input signal is detected after a
Auto Off
set period of time to prevent unnecessary waste of lamp life.
30
Menu operation
projector's native resolution in its horizontal or vertical
width.
resizes it to fit within the display area. For input signals
with lower resolutions, the projected image will be
displayed in its original size.
of the screen with a 4:3 aspect ratio.
center of the screen with a 16:9 aspect ratio.
center of the screen with a 2.4:1 aspect ratio.
15:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:9 picture

Advertisement

Table of Contents
loading

This manual is also suitable for:

W1700sHt2550

Table of Contents