Installation Menu; System Setup: Basic Menu - BenQ V7000i User Manual

INSTALLATION menu

Projector The projector can be installed behind a screen, or with one or more mirrors. See
Obtaining a preferred projected image size on page
Position
Motor Focus After entering this menu, use
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image proportionally to fit the
Aspect Ratio
• 4:3: Scales an image so that it is displayed in the center
• 16:9: Scales an image so that it is displayed in the
We recommend you use the High Altitude Mode when your environment is
between 1500 m–3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "High Altitude Mode" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
High Altitude
may display auto shut-down symptoms, which is designed to protect your projector
Mode
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.
Auto See
Keystone
Keystone

SYSTEM SETUP: BASIC menu

Language Sets the language for the On-Screen Display (OSD) menus.
projector's native resolution in its horizontal or vertical
width.
of the screen with a 4:3 aspect ratio.
center of the screen with a 16:9 aspect ratio.
Correcting keystone on page
15.
/ to adjust the focus settings.
16.
15:9 picture
4:3 picture
16:9 picture
Menu operation 37