Table of Contents
Advertisement
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
1. After the start-up logo, press MENU on the projector or MENU/EXIT on the remote control, and
then press
/
until the Advanced Setup menu is highlighted.
2. Press
to highlight Lamp Settings and press ENTER. The Lamp Settings page is displayed.
3. Highlight Reset Lamp Timer and press ENTER. A warning message is displayed asking if you want
to reset the lamp timer. Highlight Reset and press ENTER. The lamp time will be reset to "0".
55
Additional information
Advertisement
Table of Contents
