System Setup: Basic Menu - BenQ TK850i User Manual

SYSTEM SETUP: BASIC menu

Language Sets the language for the On-Screen Display (OSD) menus.
Splash Screen Allows you to select which logo screen will be displayed during projector start-up.
Allows the projector to turn off automatically if no input signal is detected after a
Auto Off
set period of time to prevent unnecessary waste of lamp life.
Direct Power Allows the projector to turn on automatically once the power is fed through the
power cord.
On
• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Menu Display Time: Sets the length of time the OSD will remain active after
Menu Settings
• Reminder Message: Sets the reminder messages on or off.
Renames the current input source to your desired name.
Source
On the Source Rename page, use
characters for the connected source item.
Rename
When done, press BACK to save the changes and exit.
Auto Source Allows the projector to automatically search for a signal.
• Sound Mode:
Sound
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• S/PDIF: Enable or disable S/PDIF.
• L/R Switch: Switch the left/right audio channels.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
• Reset Audio Settings: All of the adjustments you've done for the Sound menu
your last key press.
• Effect Mode: This function utilizes MaxxAudio sound enhancement
technology, which incorporates Waves's algorithms to deliver great effects of
the bass and treble, and provide you with immersive cinematic audio
experience. The following preset sound modes are provided: Standard,
Cinema, Music, Game, Sports and User.
The User mode allows you to personalize the sound settings. When selecting
the User mode, you may make manual adjustments with the User EQ
function.
If the Mute function is activated, adjusting Sound Mode will turn off the
Mute function.
• User EQ: Select desired frequency bands (100 Hz, 300 Hz,1k Hz, 3k Hz, and
10k Hz) to adjust the levels according to your preference. The settings made
here define the User mode.
in startup and shutdown process.
return to the factory preset values.
/ / / , and OK to set the desired
Menu operation 33