Table of Contents
Advertisement
Using the preset and user modes
Selecting a preset mode
The projector is preset with several pre-defined picture modes so that you can choose one to suit your
operating environment and input source picture type.
To select a picture mode that suits your need:
•
Using the remote control
Press PRESET MODE on the projector or MODE/ENTER on the
remote control repeatedly until your desired mode is selected.
•
Using the OSD menu
1. Press MENU on the projector or MENU/EXIT on the remote
control and then press
highlighted.
2. Press
to highlight Picture Mode.
3. Press
/
until your desired mode is selected.
These modes consist of preset values suitable for various projection situations as described below:
•
Cinema: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through
the PC input for best viewing in a blackened (little light) environment.
•
Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments
where extra-high brightness is required, such as using the projector in well lit rooms.
•
Presentation: Is designed for presentations. The brightness is emphasized in this mode to match PC
and notebook coloring.
•
sRGB: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness
setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated
camera, and for viewing PC graphic and drawing applications such as AutoCAD.
•
User 1/User 2: Recalls the customized settings. See
for details.
Fine-tuning the selected picture mode
The pre-defined picture mode settings can be altered via the available items shown in the Picture --
Basic and Picture -- Advanced menus.
To fine-tune the picture mode:
1. Press MENU on the projector or MENU/EXIT on the remote control, and then press
the Picture -- Basic or Picture -- Advanced menu is highlighted.
2. Press
to highlight the item you want to adjust and press
selection is automatically stored in the projector and associated with that input source.
See
"Fine-tuning the picture quality" on page 29
for details.
Each time you change the picture mode, the projector also changes the setting to the one which was last
set for that particular picture mode on that particular input. If you change the input source, the most
recently used picture mode and settings for that input and resolution will be restored.
/
until the Picture -- Basic menu is
and
"Setting the User 1/User 2 mode" on page 28
/
to set your desired value. Your
"Advanced picture quality controls" on page 30
/
until
27
Using the projector
Advertisement
Table of Contents
