System Setup : Basic Menu - BenQ W2000w User Manual

System Setup : Basic menu

Submenu
Language
Background Color
Splash Screen
Projector Position
Auto Off
Direct Power On
Menu Settings
Source Rename
Auto Source
Wireless IR Sync
Functions and Descriptions
Sets the language for the On-Screen Display (OSD) menus.
Sets the background color when there is no signal to the projector.
Allows you to select which logo screen is displayed during projector start-up.
You can choose BenQ logo screen, Blue screen, or Black screen.
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See Choosing a location
Prevents unnecessary projection when no signal is detected for a long time.
See Setting Auto Off for details.
When the function is set to On, the projector will be turned on automatically
once the power is fed through the power cable. When the function is set to
Off, you'll have to turn on the projector by pressing
on the remote control.
• Menu Type
Switches to the Basic OSD menu.
• Menu Position
Sets the OSD menu position.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Blank Reminder Message
Sets whether the reminder message is displayed by the projector while the
image is hidden.
Renames the current input source to your desired name.
On the Source Rename window, use
characters for the connected source item.
When done, press OK to save the changes.
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it acquires a
signal. If the function is set to Off, the projector will select the last used input
source.
Sets an IR frequency for the connected source devices when the Wireless FHD
kit is used. With the IR blaster cable, receiver, transmitter, and source devices
correctly connected, you can remotely control the source devices with their
remote controls at the receiver (projector) side.
The default IR blaster frequency is 47 KHz which is compatible with most
remote controls. Therefore, you need not change the IR frequency in most of
cases. See the Wireless FHD kit's user documentation for more details.
for details.
on the projector or
/ / / to set the desired
Menu Functions
41