Printing And Deleting Held Jobs - Dell 3115 Color Laser User Manual

NOTE: Print and Hold functions requir imum of 384 MB available print memory. Also,
you need to confi RAM disk settings on both the operator panel and the printer d
NOTE: Depending on the documents, may be too big for the available memory. In this
case, an erro s.
NOT If a document name is not assigned to your print job print driver, the job's name
will be identified using the PC's d date of submission to distinguish it from other jobs
you ha d under your name.

Printing and Deleting Held Jobs

Once held jobs are stored in print m ou can use the printer operator panel to specify what
you want with one or more of the jobs. You can select either Secure Print and Proof
Print from " rint(See 13.)". Then, you select your user name from a list. lect Secure Print,
y type the password you specified in the driver when you sent th See
15.)" for ormation.
From either the rint or Proof Print menu items, you have three choices:

Del after Print

rint and Save

Delete
NOTE: To job to print as Secure Printing or Proof Printing, select Secu ting or Proof
Printing in Job Type in the Paper/Output tab of th rties dialog box.
rinting Held and Proof Print Jobs
1. Press until >SETUP appears, and then press
2. Press until >Reports appears, and then press
3. Press until >Stored Docume appears, and then press
Store Print
If you send a Store Print job, the multifunction printer t print the job immediately, but stores
the job in memory so print the job later. See
information.
NOTE: The multifunction printer holds the job until you delete g the operator panel or
you turn off the multifunction print
NOTE: When you select Del after Prin, the held job is automatically deleted after printin
Proof Print
.
.
.
"Print leting Held Jobs(See 15.)" for more
"Secure Print(See