Dell 3115 Color Laser User Manual page 161

a. Assign the TCP/IP address by DHCP mode (Cha CP/IP properties to obtain
the IP address automatically).
b. Ensure that your computer has the same IP address the printer wireless
adapter.
r example, 169.254. xxx.zzz, whe xxx" and "zzz ariables ranging from 0 to 255
c. A e Dell Printer Configuration Web Tool using the Web browser, and the
rinter wireless adapter settings in the address field of the browse
For example, http://169xxx.yyy/, where "" and "yyy" are variables rangin to 255 (Your
wireless adapter IP address)
d. Change wireless settings (SSID/ communicat from Dell Printer Configuration
Web Tool.
i. Cli Print server setting on the left navigat .
ii. Click the Print server setting tab.
iii. Click the TCP/IP sub-
iv. Select DHC.
v. Click the App etting button without restarting the multifunction printer the screen
instructions to restart the multifunction printer).
vi. Click the Wireless LAN ab.
vii. Change the SSID setting (according to your Access point SSID) and Network type to
Iture.
viii. Click the Restart printer ly new settings button.
4. Once printer wireless adapter is properly ed, you may use the typical network printer
installation method to river installation.
5. To communicate with the multifunction p ou need to restore the previous wireless
settings on your computer.
6. Restore the wireless settings for your computer.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control .
b. Right-click Wireless Network Connect and select Properties.
c. Select the Wireless Netwo tab.
d. Click the Advan utton.
e. Select Access point ture) networks only and close the Advanced dialog
box
(Applicable to the ction printer with the wireless infrastructure mode).