L
Sets Lower in the thr value.
Normal* Sets N in the threshold value.
Higher
Higher in the threshold value.
Country
Purpose:
To the country where the multifunction printer is used.
Fwd. Error Print
Purpose:
To pr ocuments failed to transfer when Forward Set Print is se Off.
Values:
On* Prints doc hat failed to transfer when Forward Set Print is set to Off.
Off
Does not print documents ailed to transfer when Forward Set Print is set to Off.
System Settings
Use the System Settings menu to configure the bas ter settings.
NOTE:
Values marked by a erisk (*) are the factory default menu settings.
Power Saver Mode2
Purpose:
To enable Power S de2.
Values:
Enable* Enables Power Saver Mode2.
Disable
Disables Power Saver Mode2.
er Saver Timer
Pur
To specify the amount of time the multifunction pr aits after a job is submitted before it goes
into the power sa e.
Values: